| | |
| |
| |
| |
| |
| |
SANISHOWER UPFLUSH TOILET DETAILED SPECIFICATIONS
The Sanishower comes with the pump case only, containing the macerating unit.
Specifications:
Dimensions:
Including pump only
H6 x W13" x D6½"
H15cm x W33cm x D17cm
Motor: Induction Motor
(no carbon brushes or gears), tested over 30,000 cycles. 3600 rpm.
Electrical supply:
110-115V; 60Hz; 5.5amps
Discharge:
Horizontally to 100 ft (33m)
Pumps vertically to 9 ft (3m)
Gravity Fall on Horizontal installations: 1/4" per ft
Discharge Pipe Diameter:
¾" or 1"; 21mm or 25mm
Construction Materials: Polypropylene, C.R.P., stainless steel, Neoprene
Max. temp. 104°F; 40°C
Normal Running Time:
10–20 secs subject to installation pipe run
Water per Flush:
1.3 US gal; 3.5 liters
Volume 7.62 gal/m; 48 l/m
Designed to function with:
Hand-basin, Shower
Note: This product is not currently CSA or UL certified. They have however received
all of the necessary European electrical certifications. Please note that this
product is in the process of being tested at a recognized testing laboratory
to CSA and UL electrical standards.
The Sanishower is a small gray water pump that may be used to pump waste water away from a shower, hand basin, bar sink, or other fixture.
The Sanishower is small enough to fit underneath a raised shower base. Alternatively it can be placed behind a wall or beside a shower. The Sanishower will pump wastewater up to 9 feet in height.